RYF-1550AC Dry Type Laminating Machine
Main Technical
This machine is suitable for BOPP, PET,Nylon,CPP,CPE, PE,paper and other similar roll plastic film in two layers or more laminating.
Max. Web Width: 1550mm
Max. Laminating width:1500mm
Max. Laminating Speed: 160m/min
First Unwind Diameter: ф600mm for film
unwind diameter:600mm
Rewind diameter:600mm
Inner diameter of web paper roll:film 3inches
Layers of laminating: two layers at one time
Range of tension control: 4~10kg
Power of heating chamber:135kw
Heating way: Electric
Total power:About 170kw
Weight: 15000kg
Dimension L16000×W3200×H3400(mm)
Main parts and specification
This machine includes first unwind part,gluing part,dryer part,second unwind part,laminating part,rewind part,pneumatic system and electronic appliance control system.
1.Unwind Unit(include first & second unwind)
First Unwind
Features
1.Equipped with Hydraulic lifting uncoiler for unwinding.
2.Magnetic powder brake for tension.
3.Air shaft type for unwind roll, it is much convenient to change shaft and centering correctly.
4.The adjustment of horizontal material roll is manual.
5.Unwinding shaft is installed in the rolling bearing to reduce the mechanical resistance to minimum.
Parameters
(1)Max. Diameter of Unwindφ600mm
(2)Max. Width of Unwind:1550mm
(3)Inner Diameter of Paper Tube for Unwinding 3inches
(4)The Horizontal Adjustment Range of Materials Roll:±20mm
(5)Magnetic powder brake 1set
(6)Unwind air shaft 3" 1piece
(7) Electric Control Cabinet 1set
Second Unwind
Features
- Hydraulic lifting type unwinding frame, processing precision and installation accuracy are guaranteed
- Magnetic powder brake for unwinding.
- Unwind shaft is mounted on a rolling bearing to minimize mechanical resistance.
- The adjustment of horizontal material roll is manual.
Max. Unwind Diameter:ø600mm
Max. Unwind Width:1550mm
Inner Diameter of Paper Tube for Unwindingφ76mm
The Horizontal Adjustment Range of Materials Roll:±20mm
Magnetic powder brake 1set
Unwind air shaft 12" 1piece
2,Gluing Unit
1.Independent motor drive, frequency control.
2.Anilox roller quantitative gluing way.
3.Anilox roller is easy to install.
4.Pneumatic pressing rubber roller.
5.Pneumatic type doctor blade device, three directions adjustment.
6.Up and down of glue tray is manual adjustment.
Parameters
1.Anilox Roller Diameter φ160mm 1piece
2.Pressing Rubber Roller φ125mm 1piece
3.Doctor Blade Device 1set
4.Glue Tray Device 1set
5.Tuning Roller Device 1set
6.Gluing main motor (Y2-110L2-4 2.2kw) 1set
7.Transducer 3kw 1set
8.Electric Control Cabinet 1set
3,Dryer Unit
Features
1. Integral drying cabinet, pneumatic dryer cabinet with the design of open and close,easy to cross materials
2.Four independent heating pipe infrared heating hot air system.Max. Temperature 90ºC
3.In-feed unit is equipped with tuning roller.
4.Auto-constant temperature control.
5. Equipped with guide roller in oven.
6.The out-feed unit of oven is equipped with an automatic error correction system.
Parameters
1.In and out feed adjustment device 1set
2.Integral drying cabinet 10meters 1set
3.Intelligent Temperature Controller (NE1000) 4sets
4.Exhaust Fan 5.5kw 4sets
5.Main exhaust fan and pipe should be provided by customer.
4,Laminating Unit
Features
1.It is Driven by independent motor,frequency control.
2.Composite roller surface mirror grinding, oil temperature heating, automatic constant temperature.
3.Display the speed and length of laminating
4.Floating roller and potentionmeter control.
5.Double shafts frequency and feedback control gluing and laminating.
Parameters
1.Composite roller φ320mm 1piece
2.Laminating pressing rubber rollerφ160mm 1piece
3. Cooling roller device φ160mm 1set
4.Swing roller device 1set
5.Main motor (Y132s-4 7.5kw) 1set
6.Inverter 7.5kw YASKAWA JAPAN 1set
7.Temperature Controller 1set
8. Length and speed control (ZX-388) 1set
9.Electric Control Cabinet 1set
5,Rewind Unit
Features
- Hydraulic lifting type unwinding frame, processing precision and installation accuracy are guaranteed.
- PLC control.
3.Air shaft type for rewind roll, it is much convenient to change shaft and centering correctly.
4.The adjustment of horizontal material roll is manual.
5.Rewinding shaft is mounted on a rolling bearing to minimize mechanical resistance.
Parameters
Max. Diameter of Rewind φ600mm
Inner Diameter of Paper Tube for Rewinding φ76
The Horizontal Adjustment Range of Materials Roll ±20mm
Air Shaft for Rewinding 12" 1piece
Torque motor 1set
Rewind vector motor 7.5kw 1set
6. Control system
Gluing and laminating transmission units adopts double frequency synchronization.
In-feed and out-feed unit tension adopts touch screen and PLC control.
Swing arm potentiometer feedback and PID arithmetic difference compensation.
Control system adopts multi-points start-stop, speed is easy to operate.
Magnetic powder brake unwinding, automatic constant tension.
Automatic error correction control.
Torque motor for rewinding.
Drying, heat sealing adopts intelligent temperature control instrument automatic constant temperature control.
7 Others
Main bearings take Germany brand BEM
Pneumatic components and parts
All low electronic appliance come from CHNT
Tool Box 1set
Notice:
Under the premise of not reducing the performance of the machine, the type of specification may adjust for the elements that import accessories supplying change and designed machine performance requirement.
No less than 3 meters deep ground-wire before machine loading.
Audited Supplier 
Main Technical
){kind=link}
){kind=link}