MJSGL-1 Single Facer Line
(2-layer corrugated paperboard production line)
Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Technological Parameter:
| Working Width |
1400mm |
1600mm |
1800mm |
2000mm |
| Heating method |
Electrical heating/Oil heating / Steam heating |
| Design speed |
80m/min |
| Economical speed |
60 m/min |
| Compress-air pressure |
0.4-0.9MPa |
| Flute type |
Standard flute |
UV Flute |
| Standard spec. |
A,B,C,E,F |
| For other type and model, we can produce as customer's requirement. |
Detail introduction:
MJSF-280V Single Facer
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Maximum speed 100-120m/min, width 1400mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
Technological Parameters:
| Working Width |
1400mm |
1600mm |
1800mm |
2000mm |
| Heating method |
Steam heating |
| Design speed |
100m/min |
| Economical speed |
80 m/min |
| Compress-air pressure |
0.4-0.9MPa |
| Flute type |
Standard flute |
UV Flute |
| Standard spec. |
A,B,C,E,F |
| For other type and model, we can produce as customer's requirement. |
| Corrugated roll diameter (mm) |
284mm |
| Wall Thickness (mm) |
130mm |
| Type |
Vacuum Absorb, gimbal drive. |
| Roller material |
48CrMo alloy, Heat treated, chrome coated |
| Machine Size packing |
3000*1300*1700mm |
3300*1300*1700mm |
3550*1300*1700mm |
3800*1300*1700mm |
| Machine Weight |
4000kg |
5000kg |
6000kg |
7000kg |
MJSD-3 NC Paperboard Cutter Machine 2000 (PLC)
Characteristics:
1. A memory of 200 orders. Non-stop changeover can be realized. NC can also get in line with the computer internet, it is very convenient for management.
2. No gap gear for conveying with higher precision.
3. The blades applied for lower slitting weight and is of long using life.
4. The roller are wrapped wearable material, improve the using longevity of the roller and the size is more precision.
5. The wall and the stand made of grad cast iron, high strength and strong aseismicity.
6. Frequency conversion motor,servo driver control, 5.7" color touch screen.
Technological Parameters
| Model |
MJSD-3-2000 |
| Max. Cutting width. |
2000mm |
| Cutting length |
300-999mm |
| Cutting thickness |
1-2mm |
| Cutting precision |
≤±1.5mm at equal speed |
| Power |
3kw |
| Working Speed |
80m/min |
| Machine weight |
About 4.2t |
MJRS-1 Hydraulic Mill Roll Stand
Specification:
| Max. working width |
1400mm/1600mm/1800mm/2000mm |
| Min. working width |
600mm |
| Max. paper mill dia |
1500mm |
| Max working pneumatic pressure: |
0.6-0.9Mpa |
| Power requirements: |
380v, 50Hz |
| Length of track for carry paper mill |
6000mm |
Machine Introduction:
*Swing type.
*Max. paper roll dia.: 1500mm
length: 800-1400mm
*Clamping paper roll, moving right-left, arms up-down and paper roll rotation is hydraulic operated.
*Support two paper rollers in the meantime, one is working, and another is for spare part.
* Adopts "Spring clutch".
* Paper tension controlled by pneumatically operated disc brake, setting the tension easily.
Audited Supplier 
){kind=link}
){kind=link}