Full Automatic Hot Melt Glue Coating and Laminating Machine

• Customization: Available
• After-sales Service: Have
• Warranty: 1year
• Model NO.: RYT
• Driven Type: Electric
• Automatic Grade: Automatic
• Packaging Material: Paper
• Packaging Type: Cartons
• Application: PE, EVA
• Max. Coating Width: 1100mm
• Applicable Material: Paper, Film
• Coating Quantity: 15-200GSM
• Machine Speed: 50m/Min
• Max. Rewinding Diameter: 1000mm
• Transport Package: Wooden Case
• Trademark: ROYAL PACKING
• Origin: China
• Production Capacity: 10set/Month

Product Description

RYT-1100B Multi-Function Hot Melt Glue Coating Machine

Introduction:
RYT-B hot melt coating machine is suitable for producing double-side tapes, cloth tape, double side foam tape, clean tape, kraft paper tape, masking tape, aluminum foil tape, fiber tape, shoes material, medical dressing tape, low temperature hot melt adhesive film, and different materials laminating such as non-woven, filter material, medicine materials and etc.

Main characteristic:
1. AC converter control is used for both speed and quantity of glue feeding for which both automatic synchronous tracking and manual control are available.
2. RYT-B hot melt coating machine adopts intelligent PID temperature control system, it can control the temperature exactly and the error is with in 1°C
3. The glue melting oven is coated with the anti-sticking layer, efficacious prevent the hot melt adhesive against carbonization.
4. Collocate the precision metric gear, make it steadier to produce the adhesive.
5. The high precision of alloy steel spray head has guaranteed high-quality coating result.
6. High-efficiency cooling device insure the applicable range of the basic materials.
7. High-efficiency cooling device insure the applicable range of the basic materials.

Main Parameters:

Max. coating width	1100mm
Applicable material	Paper, Film
Glue type	Bulk Hot Melt Adhesive
Coating quantity	15-200g/m^2
Equality level	10- 50 g/m^2(≤±0.003mm)
Machine speed	50m/min
Length of all roller surface:	1200mm
Max. rewinding diameter	1000mm
Max. unwinding diameter	1000mm
Unwinding equipment	2set
Rewinding equipment	1set
Melt glue speed	130kg/h((EVA.3000 centipoise 165ºC
. Length of glue-carrying pipe:	3m
Temperature:	230ºC
Power	About 45KW
Power supply	~380V±15% 50Hz(can be customized)
Machine weight	About 8000kg
The quantity of glue can be adjusted independently or synchronously with the main machine

Main parts of machine

a) Machine rack

1. The unwinding roll stand is made of square steel, channel steel, and iron plate.
2. The machine rack is made of 25mm steel plate, supported by steel tube.
3. The transmission part cover is made
4. The machine is mainly composed of wall panels and connecting rods spliced together. The wall panel is finely processed by CNC gantry boring and milling center, and then spliced by large rigid connecting rods to form a mechanical support frame with exquisite appearance, full rigidity and high precision.

b) The unwinding part

1. Adopt single mechanism unwinding design
2. Magnetic powder brake for unwinding: 100N·M; 1 set 
3. Tension control system is Automatic tension control system
4. Unwinding shaft: 3″ air shaft, paper core inner dimeter is 76mm
5. First unwinding can lift electrically with one set of EPC edge position system
6. Second unwinding install on machine body

c) Rewinding part

1. Adopt double mechanism unwinding
2. Magnetic powder brake for unwinding: 100N·M; 1set
3. Unwinding shaft: 3″ air shaft, paper core inner dimeter is 76mm
4. Rewinding length can be automatic control or manual control

d) Glue melt tank

1. The shell is made of U steel, square steel and 2.0mm steel plate.
2. Use aluminum alloy to build. Three-layer (upper-middle-lower) structure. There is adhibition preventing coat on the inside surface.
3. Adopt high-temperature-resistant high-precision gear glue pump
4. Adopt external precise filter.
5. The glue pump speed is controlled by gear reducer motor
6. Temperature of each layer is controlled by PID system independently
7. Max. temperature is 230ºC
8. Melt glue speed: 130kg/h
9. Tank capacity: 200L
10. Heating power: app. 25KW

e) Glue hose
1. Material: PTFE tube (imported tube core)
2. Inner diameter: 16mm
3. Length: 3000mm
4. Withstand voltage: 60KG/cm2
5. Max. temperature: 230ºC
6. Heating power: 800W
7. Min. bending radius: 20CM
f) Coating, laminating & roller part
1. Coating head material: The internal flow channel design of the high temperature resistant and wear-resistant alloy steel coating head is reasonable, the flow is fine and uniform, and the flow channel is polished.
2. With multi-zone temperature independent control and adjustment function, local temperature can be separately adjusted with high precision according to demand, and PID adjustment function.
3. Equipped with multiple local glue volume adjustment valves, the local glue volume can be adjusted according to actual needs, and the glue output is more uniform and stable.
4. The coating head is driven by a pneumatic cylinder. Its device design is sturdy and stable, which is convenient for the passage of the substrate. The design is exquisite and can be adjusted quickly.
5. Power of coating head: about 8KW
6. Coating roller: ¢215mm silicone roller, equipped with 2 rotary joints, water cooling one in and one out, after dynamic balance correction.
7. Composite roller: ¢215mm steel roller chrome-plated, equipped with 2 rotary joints, water cooling one in and one out, after dynamic balance correction.
8. Composite pressure roller: ¢215mm silicone roller, equipped with 2 rotary joints, water cooling one in and one out, after dynamic balance correction.
9. Cooling roller: ¢215mm steel roller chrome-plated, equipped with 2 rotary joints, water cooling one in and one out, after dynamic balance correction.
10. Drive roller: ¢80mm aluminum guide roller with several anodes
g) Transmission part
1. Main motor: 3.7KW
2. Main machine use belt, chain, and gear to transmit
h) Pneumatic control part
1. Cylinder on coating head: ¢100mm 2 pieces
2. Cylinder on laminating press roller: ¢100mm 2 piec
3. Other pneumatic components: pressure regulating valve, hand valve, etc.
4. There is a Φ8mm main pipe (PU) running through the whole machine
5. Air pressure source: 4-7kg/m2
6. This equipment does not contain an air compressor