MJFM Model Water-Soluble Laminator
This machine adopts the frequency control of speed, with stable performance.
Conveniently adjust the gaps between the rubber roller and steel roller through the handle, can easily make the glue coat on the film even and paste together with the paper.
This machine equips with functions of the automatic circulating up-glue, sheet perforation, and quick coil exchanging setup of the finished-product coiling device.
1, the main machine adopts imported frequency inverter, with stable performances.
2,it equipped with automatic stopped for lacking of paper, paper counting, automatic film cutting, treatment of finished product fast pushing etc.System.
3, this machine has a compact and reliable structure has features of high speed and energy saving.
4, adopts immersion coating method, the pump automatic purvey glue.
5,the power supply for this machine is 220 V, 50 HZ (can design according to customer's requirement).
6, the machine adopts cast-iron structure and has such characteristics as long service life and non- deformation.
7, the machine adopts four-roller double pressure laminating to make product quality stable and reliable.
The main technical parameters:
| Model|| MJFM-1000|| MJFM-1200|
| Max. width|| 950mm||1150mm|
| Motor power||1.5KW||1.5KW|
| Weight||1.2T|| 1.3T|
| Size|| L2500*W1700*H1350mm|| L2500*W1880*H1350mm|
| Power (can design as your requirement)|| 220V/50H,380V/50HZ|| 220V/50H,380V/50HZ|
Structure and Working Principle:
3.1 this machine consist of glue part, paper feeder, the film output part, membrane pressing part, winding system of finished product and electric control system. When work, send the film by the film output part, after coating of glue directly into the compound membrane pressing part, printed paper through the paper feeder synchronization to the membrane pressing part. Printed paper after pressing compound membrane pressing part will be the unity of paper-plastic products, then automatic winding by the finished product winding system. This machine has an electric motor power (frequency conversion control), each part of the operation can be simultaneously.
3.2 glue part consist of steel roller, rubber roller, glue system, adjusting mechanism of rubber roller. Compound membrane by adhesive glue pump type out, flow to the rubber roller through the glue system which adjust coating weight through the handwheel, so as to adapt to the different thickness of the paper.
3.3 membrane pressing part is mainly including pressing steel roller, the pressing rubber stick, pressing roller adjusting mechanism, temperature measuring device and other components. Bonding steel roll and rubber roll gap is controlled by the regulating handle through the worm gear and worm pair, roller parallelism between uniformity (pressure) by the roller end adjustment bolt to adjust.
3.4 feed used rubber conveyor belt transmission, the paper smoothly. Respectively before and after the feed on the plane with a photoelectric sensor, photoelectric sensor before only have counting function, can accurately record the paper sent by number of sheets, for the user to save a handsome paper process; Photoelectric sensor after only has the function of automatic stop short of paper can automatically stop in time for the missing paper, avoid glue film due to lack of paper after the adhesive on the roller.
3.5 finished coiler winding trolley system equipped with 5 activities, so that the continuous winding. Winding with controllable friction clutch at one end of the handwheel, turn the handwheel to control winding system is working and change the winding speed so as to adjust the winding tension.
3.6 the membrane organization has a friction belt, the hand wheel can be adjusted based on the elastic, automatic cutting device is located in the membrane shaft above, can be easily cut thin film.
3.7 electrical control system is the hub of the machine, electrical schematic diagram in figure 2, figure 3.Electrical components in integrated electrical control cabinet, control button and the display instrument set in the feed table on the left side of the electrical control panel.
6.1 operating procedures Clean up, before starting the machine, and then plug in power plug, start the motor. Wear thin film, adjust the pressure between the pressing roller pressure adjustment (to simply drive the rubber pressing roller rolling), according to the adjusting method mentioned in section 5.1 adjusted the film to make the film conveying not wrinkle, even tension. To adjust the feed paper lateral positioning, and then according to the method mentioned in section 5.2, 5.4, adjust the glue coating weight and tension of the winding system of finished product. Then open the glue put glue pump, all the adjustment after the completion of the work and then run the machine, at the same time synchronized feed feed. Protracted war began to film a few, once again, adjust the levels of coating and uniformity, until the film effect is good rear can normal work. Work after downtime should be timely cleaning roller, when cleaning the roll out of each other, in case of roller compression deformation (cleaning roller) with water.
6.2 Whether bonding steel roller heating depending on the glue, glue are generally not need to heat. Drying section tubes can be arbitrary adjustable size, root according to climate changes in temperature and different paper, decide whether to use.
6.3 Matters Needing Attention
6.3.1 During operation, if a film adhesive should immediately stop the condition of roller, to clean up again after operation.
6.3.2 Must be careful when cleaning roller, prevent clean cloth or hand is squeezing roller clearance, cause personal injury or damage of roller.--------------------------------------------------------------
We have more than 20 years' experience in manufacturing corrugated cardboard production machine field.
Top quality, Competitive price, Timely delivery and Heart-to-heart service.
Your Best Partner in China!!