Introduction:
Single facer line is also called 2-layer corrugated paperboard production line.
The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine.
To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying.
This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy.
This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
MJRS-1 Hydraulic Mill Roll Stand
Technical parameters:
1. Work expiry width: 800-2500mm
2. Movement mode: Full hydraulic pressure type action
3. Clamp paper diameter: MaximumΦ1500mm minimumΦ350mm
4. Single arm maximum weight: Maximum 3000kg
5. Stents spindle diameter: DiameterΦ240mm
6. Hydraulic cylinder working range (fluctuating): Φ100mm× 460mm
7. Hydraulic station motor power: 5.5kw
Pre-heater 800
Technological Parameters:
Effective working width 1600--1800mm
Diameter of pre-heater Ø 900-1000mm
Diameter of wrap angle shaft Ø 86mm× 2
Worm gear motor 0.37kw ratio: 1: 450
Steam temperature and pressure 150-200° \0.8-1.3MPa
MJSF-320FX Vacuum fingerless Single facer
Technological Parameters:
Working speed 1400--2200mm
Design speed 150m/min
Operating Direction Left or right (design as customer's workshop. )
Flute type according to the need of the customer
Base Castings HT200
Wallboard CastingsHT200/thickness 180mm
The up and lower roller diameter Φ320mm/
Pressure roller diameter Φ320mm /45steel
Upper and lower pre-heating diameter Φ400mm/45steel
Pneumatic power 0.4_0.9Mpa
Transport bridge
Effective working width 1600--1800mm
Operation direction According to customer's require
Enhance Gear Motor 3.7kw
Bridge adsorption fan 2.2kw
Correction adjustment motor 0.37kw
Full computer NC slitting and cross cut machine(with full automatic stacker)
Technical Parameters:
1. Dimensions: 9300mmx2950mmx1600mm
2. The maximum cutting width: 1850mm
3. Speed: 150m/min
4. The minimum slitting width: 350mm
5. Maximum cutting thickness: 8mm
6. Transverse length: 350mm-1400mm
7. Total motor power: 20kw (Direct cross-8.4kw)
| Working Width |
1400mm |
1600mm |
1800mm |
2000mm |
| Heating method |
Electrical heating/Oil heating / Steam heating |
| Design speed |
150m/min |
| Economical speed |
120 m/min |
| Compress-air pressure |
0.4-0.9MPa |
| Flute type |
Standard flute |
UV Flute |
| Standard spec. |
A,B,C,E,F |
| For other type and model, we can produce as customer's requirement. |
Audited Supplier 
){kind=link}