MJSGL-4 High-speed Single Facer Line
(2-layer corrugated paperboard production line)
Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
HS CODE: 844180900
Main Technological Parameters:
| Working Width |
1800mm |
2000mm |
2200mm |
2500mm |
| Heating method |
Electrical heating/Oil heating / Steam heating |
| Design speed |
150m/min |
| Economical speed |
120 m/min |
| Compress-air pressure |
0.4-0.9MPa |
| Flute type |
Standard flute |
UV Flute |
| Standard spec. |
A,B,C,E,F |
| For other type and model, we can produce as customer's requirement. |
EQUIPMENT DETAILS
1. MJRS-1 Hydraulic Mill Roll Stand
Technical parameters:
1. Work expiry width: 800-2500mm
2. Movement mode: Full hydraulic pressure type action
3. Clamp paper diameter: MaximumΦ1500mm minimumΦ350mm
4. Single arm maximum weight: Maximum 3000kg
5. Stents spindle diameter: diameterΦ240mm
6. Hydraulic cylinder working range (fluctuating): Φ100mm×460mm
7. Hydraulic station motor power: 5.5kw
Structure characteristics:
1. Symmetrical structure may also install two original paper, tube bundle is kept for paper assignments.
2. Adopts hydraulic drive, can complete base paper lifting, clamping, loosen, move on.
3. Adopt pneumatic tension adjust base paper tension and automatically bulge style chuck.
4. Tension control equipped with pneumatic brake, also can connect with the automatic paper splice machine to achieve quick paper supply.
2. Pre-heater 800
Technological Parameters:
| Effective working width |
1600--1800mm |
| Diameter of pre-heater |
Ø900-1000mm |
| Diameter of wrap angle shaft |
Ø86mm×2 |
| Worm gear motor |
0.37kw ratio:1:450 |
| Steam temperature and pressure |
150-200°,0.8-1.3MPa |
Structural features:
1. Preheat cylinder pressure vessel meets a national standard, together with the pressure vessel certificate and inspection certificate.
2. Preheater of wrap angle shaft is gear drive.
3. After each roll and preheat cylinder precision grinding and grinding off the hard chrome plating, improved finish, reduces friction, durable.
4. With electric adjustment corners, corners can be adjusted within the range of 60-270 °, can effectively adjust the paper heated area.
5. The preheat cylinder head using the butterfly design,can improve the performance of the pressure ; using steam heating to ensure uniform heating paper.
6. Corners motor with worm gear motor, with good self-locking performance.
3. MJSF-320FX Vacuum fingerless Single facer
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
Technological Parameters:
| Working speed |
1400--2200mm |
| Design speed |
150m/min |
| Operating Direction |
Left or right (design as customer's workshop.) |
| Flute type |
according to the need of the customer |
| Base |
Castings HT200 |
| wallboard |
CastingsHT200/thickness 180mm |
| the up and lower roller diameter |
Φ320mm/ |
| Pressure roller diameter |
Φ320mm /45steel |
| Upper and lower pre-heating diameter |
Φ400mm/45steel |
| Pneumatic power |
0.4-0.9Mpa |
4. Transport bridge
Technical parameters:
| Effective working width |
1600--1800mm |
| Operation direction |
According to customer's require |
| Enhance Gear Motor |
3.7kw |
| Bridge adsorption fan |
2.2kw |
| Correction adjustment motor |
0.37kw |
Structural features:
1. This part of the main beam is mainly connected by channel, beam, angle, column, etc connected together.
2 .Both sides of the security fence, high strength and save people the word pedals, ensure operator safety and ease of operation.
3. Ascension pull paper axis, the tension axis, feeding off of the shaft, such as surface grinding hard chrome plating process.
4. Adopt adsorption tensioner tension adjusting device, the air volume is adjustable.
5. Correction device for the electric, easy to operate. Correction side fence with double guide column positioning screw driver, fast and accurate positioning, walking steadily.
6. All roller surface by grinding off the hard chrome plating process.
7. Feeding conveyor transfer using green plain.
5. Full computer NC slitting and cross cut machine(with full automatic stacker)
Technical Parameters:
1. Dimensions : 9300mmx2950mmx1600mm
2. The maximum cutting width: 1850mm
3. Speed: 150m/min
4. The minimum slitting width: 350mm
5. Maximum cutting thickness : 8mm
6. Transverse length : 350mm-1400mm
7. Total motor power: 20kw (Direct cross-8.4kw)
Audited Supplier 
){kind=link}