Customization: | Available |
---|---|
After-sales Service: | / |
Warranty: | 1year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Paper Width | Gross width 850mm, Net width 840mm |
Cutting numbers | 2 cutting-A4 210mm (width) |
Paper roll's diameter | Max.Ф1450mm. Min.Ф600mm |
Paper core's diameter | 3"(76.2mm)or 6"(152.4mm) or according to the clients' demand |
Packing Paper grade | High-grade copy paper; High-grade office paper; High grade Free Wood paper etc. |
Paper weight | 60-100g/m2 |
Sheet length | 297mm ( specially design for A4 paper, the cutting length is 297mm) |
Ream amount | 500 sheets Max. Height: 45-55mm |
Production speed | Max 0-300m/min(depends on different paper quality) |
Max. Numbers of cutting | Max1010/min |
Output of the ream | About 12-16 reams/min |
Load of cutting | 100g/m2 (2×100g/m2) |
Cutting accuracy | ±0.2mm |
Cutting condition | No variation of the speed, no break, cut all the paper at one time and need the eligible paper. |
Main power supply | 3*380V /50HZ |
Voltage | 220V AC /24V DC |
Power | 23KW |
Air consumption | 200NL/min |
Air pressure | 6 bar |
Edge cutting | 5~15mm×2 |
Safety standard | Design according the safety standard of China |
1) Machine Type | Each machine table can take 2 sets of shaftless paper rack. | |
2) Diameter of the paper roll | Max. Ф1450mm | |
3) Width of the paper roll | Max. Ф850mm | |
4) Paper rack's material | Steel | |
5) Clutch device | Pneumatic Braker and control | |
6) Clip arm's adjustment | Manual adjust by oil pressure | |
7) Paper core demanding | 3"(76.2mm) air expansion shaft chuck |
1) When the paper through inductor, that automatic feedback to the PLC control system to increase brake load, increase or reduce the tension that control the paper tension automatically. |
1) Upper and lower knives are rotary make the cutting accuracy is very precision. | |
2) Anti-curve device Include one set of square bar and steel wheel. When the curve paper through paper edge unit that can adjust the paper square and let it flat. |
|
3) 5 sets slitting knives Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф200mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge. |
Upper wheel | Ф200*550mm (rubber covered) | |
Lower wheel | Ф400*550mm (anti-glide) | |
5) Cutting knife group | ||
Upper cutting knife | 1 sets 550mm | |
Lower cutting knife | 1 sets 550mm |
1) Transporting by level and overlapping device | |
2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system. | |
3) Static removal device(Include static removal bar and Negative ion generator) |
1) Automatic device for paper stack up and down | |
2) Jogging device and clap paper tidy. Control by air vat, when design sheet, the cylinder up and down by cut paper bar. After transport paper to belt, transport to the pack table cross. |
Upper knife | 1 sets | 550mm Material: compounding of tungsten steel |
Lower knife | 1 sets | 550mm Material: compounding of tungsten steel |
Upper slitting knife | 5 sets | Ф180mm Material: SKH |
Lower slitting knife | 5 sets | Ф200mm Material: SKH |