Hydraulic mill roll stand:
Control type: Whole hydraulic type
Working width: Max1600mm, Min900mm
Diameter of paper reel: Max 1500mm, Min 350mm
Single side max loading: 2500kg
Mill roll stand main shaft diameter: 210mm
Pneumatic work pressure: 0.6~0.9MPa
Whole machine dimension: 3850× 1600× 1650(L× W× H)(when shift swing)
Railing for Reels
1. applicable to corrugated line width: 1800mm
2. Dimensions: 6000mm× 300mm× 170mm(length x width x height)
3. pulley size: 700mm*300mm*220m006D
Pre-heater:
Pre-heater drum diameter: 900 mm, Pre-heating scope: 60-270 degree
Steam consumption: 0.25t/h Temperature requirements: 150-200
Manufacture width: 1600mm Working pressure: 0.8~1.3Mpa
Single Facer:
Machine width: Max 1600mm, min: 800mm
Max speed: 180m/min
Working pressure: 0.6-0.9Mpa, steam work pressure: 0.8-1.3Mpa
Steam consumption: 0.5-0.8t/h Temperature requirements: 160-200
Triplex Bridge Coneyer:
Working width: 1800mm
Designed speed: 150m/min
Guiding paper roll diameter: Front upper 135mm back upper 135mm
Low-speed transportation roll diameter: Driving roll 135mm tail roll 135mm tension roll 85mm hanging roll: 100mm absorptive paper guide roll: 100mm
Four layers Pre-heater:
Preheater drum diameter: 900 mm, Pre-heating scope: 60-220 degree
Steam consumption: 0.35-0.45t/h Temperature requirements: 150-200
Manufacture width: 1600mm Working pressure: 0.8~1.3Mpa
Gluing Machine:
Working width: 1600mm
Work speed: 150mm/min
Steam temperature pressure: 150~200 Steam working pressure: 1.12~1.3MPa
Steam consumption: 0.1~0.15Mpa, Compress air: 0.6~0.9MPa
Pressing paper type: Pressing roller type
Heating roller diameter: 325mm, thickness: 20mm, surface experienced grinding and chrome plating treatment.
Leading paper roller diameter: 120mm, thickness: 15mm. Surface experienced grinding and chrome plating treatment.
Pasting roller diameter: 288mm, thickness: 30mm, surface experienced grinding and chrome plating treatment.
Doctor roller diameter: 120mm, thickness: 15mm, surface experienced grinding and chrome plating treatment.
Double Facer
Manufacture width: 1600mm
Temperature requirements: 160~200, Steam pressure: 0.8~1.3MPa
Steam consumption: 1.2~1.8t/h, pneumatic pressure: 0.6~0.9MPa
Heating plants section length: 11130mm(600mm× 18), cooling section length: 7000mm
Slitter Scorer
Design speed: 200m/min
Max. Slitting width: 1600mm Min. Slitting width: 140mm
5 blades 8 scores the whole machine can move left-right: 90mm
Working pressure: 0.6~0.9 Mpa
Comparative moisture: 20%~90% *Temperature required: 5~50
NC Cutting machine
Work width: 1600mm
Max machine speed: 180m/min
Cutting length: 500mm-9999mm
Cardboard: Original paper: < 360g/ liner paper< 200g/
Thickness3-14mm moisture content < 10%
Min. Width warping1000mm < 30mm
Comparative moisture: 20%~90% *Temperature required: 5~50
Working pressure: 0.6~0.9 Mpa
Cutting cardboard blade shaft diameter: Upper 188 mm low 188 mm
Guiding cardboard shaft diameter:
Front upper 165mm(sun wheel) front lower 135mm
Back upper 135mm back lower 135mm
Stacker
Max length for carton sheets: 2300mm
Max Speed: 150m/min Economic speed: 80-120m/min
Working pressure: 0.6~0.9Mpa
Glue Making System
Horizontal agitator: Main pot: 950L, 1set
Carrier pot: 350L, 1set
Glue storage room: 1000L, 1set
Single facer storage pot: 350L, 2sets
Single facer back glue pot: 350L, 2sets
Secondary gluing machine storage pot: 350L, 1set
Secondary gluing machine back glue pot: 350L, 1set
Pneumatic System
Working pressure: 0.8-1.0MPa Environment temperature: -5----+50
Compressed air output: 0.9/min Store barrel volume: 0.9m3
Electric Control System
Steam System
| No. |
Machine name |
Qty |
|
| 1 |
Hydraulic Mill roll stand |
7 |
|
| 2 |
Railing and tracks |
14 |
|
| 3 |
Single facer |
3 |
|
| 4 |
Bridge conveyor |
1 |
|
| 5 |
Pre-heater |
3 |
|
| 6 |
Pre-conditioner |
3 |
|
| 7 |
Four layers pre-heater |
1 |
|
| 8 |
Triple Gluing machine |
1 |
|
| 9 |
Double facer |
1 |
|
| 10 |
Main drive |
1 |
|
| 11 |
NC Slitter scorer |
1 |
|
| 12 |
NC cutoff |
1 |
|
| 13 |
stacker |
1 |
|
| 14 |
Glue making system |
1 |
|
| 15 |
Pneumatic system |
1 |
|
| 16 |
Electric system |
1 |
|
| 17 |
Steam system |
1 |
|
| Optional machine |
splicer |
7 |
| Production Management System |
1 |
Audited Supplier 
){kind=link}