| Customization: | Available |
|---|---|
| After-sales Service: | Life Time |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Paper Width | Gross width 850mm, net width 840mm |
| Cutting numbers | 2 cutting-A4 210mm (width) |
| Paper roll's diameter | Max.Ф1450mm. Min.Ф600mm |
| Paper core's diameter | 3"(76.2mm)or 6"(152.4mm) or according to the clients' demand |
| Packing Paper grade | High-grade copy paper; High-grade office paper; High grade Free Wood paper etc. |
| Paper weight | 60-100g/m2 |
| Sheet length | 297mm ( specially design for A4 paper, the cutting length is 297mm) |
| Ream amount | 500 sheets Max. Height: 45-55mm |
| Production speed | Max 0-200m/min(depends on different paper quality) |
| Max. Numbers of cutting | Max 841/min |
| Output of the ream | About 13reams/min |
| Load of cutting | 100g/m2 (1×100g/m2) |
| Cutting accuracy | ±0.2mm |
| Cutting condition | No variation of the speed, no break, cut all the paper at one time and need the eligible paper. |
| Main power supply | 3*380V /50HZ |
| Voltage | 220V AC /24V DC |
| Power | 23KW |
| Air consumption | 200NL/min |
| Air pressure | 6 bar |
| Edge cutting | 5~15mm×2 |
| Safety standard | Design according the safety standard of China |
| 1) Machine Type | Each machine table can take 2 sets of shaftless paper rack. |
| 2) Diameter of the paper roll | Max. Ф1450mm |
| 3) Width of the paper roll | Max. Ф850mm |
| 4) Paper rack's material | Steel |
| 5) Clutch device | Pneumatic Braker and control |
| 6) Clip arm's adjustment | Manual adjust by oil pressure |
| 7) Paper core demanding | 3"(76.2mm) air expansion shaft chuck |
| 1) When the paper through inductor, that automatic feedback to the PLC control system to increase brake load, increase or reduce the tension that control the paper tension automatically. |
| 1) Upper and lower knives are rotary make the cutting accuracy is very precision. |
|
| 2) Anti-curve device Include one set of square bar and steel wheel. When the curve paper through paper edge unit that can adjust the paper square and let it flat. |
|
| 3) 5 sets slitting knives Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф200mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge. |
| 4) Paper feeding wheel |
| Upper wheel | : | Ф200*550mm (rubber covered) | |
| Lower wheel | : | Ф400*550mm (anti-glide) | |
| 5) Cutting knife group | |||
| Upper cutting knife | : | 1 sets 550mm | |
| Lower cutting knife | : | 1 sets 550mm | |
| 6) Driving group(High precision bear and belt drive) | |||
| 7) Main driving motor group: 15KW | |||
| 1) Transporting by level and overlapping device |
| 2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system. |
| 3) Static removal device(Include static removal bar and Negative ion generator) |
| Upper knife | : | 1 sets 550mm Material: compounding of tungsten steel |
| Lower knife | : | 1 sets 550mm Material: compounding of tungsten steel |
| Upper slitting knife | : | 5 sets Ф180mm Material: SKH |
| Lower slitting knife | : | 5 sets Ф200mm Material: SKH |
| Paper Width | Gross width:310mm ;net width :297mm |
| Ream packing high | Max 55mm ; Min 45mm |
| Packing roll dia | Max.1000 mm ; Min.200mm |
| Packing roll width | 560mm |
| Packing sheets weight | 70-100g/m2 |
| Packing sheets grade | high-grade copy paper, high-grade office paper, high-grade offset paper etc. |
| Design speed | Max 50 reams/min |
| Operation Speed | Max 35 reams/min |
| Packing condition | no speed variations, no breaks, cut all the paper at one time and qualified packing paper. |
| Driving | AC Servo Precision Control |
| Main power supply | 3*380V /50HZ( or as required) |
| Voltage | 220V AC /24V DC (or as required) |
| Power | 18KW |
| Compressing air consumption | 300NL/min |
| Air pressure | 6bar |
| 1. Conveyer system for reams placement ( 800*1100) | One set |
| 2. Ream accelerated to placing system | One set |
| 3. Unwind stand for packing roll | One set |
| 4. Lifting system for reams | One set |
| 5. Pressing and tighten system for reams | One set |
| 6. Lower folding system for packing sheets | Two sets |
| 7. Angle overlapping system for packing sheets | One set |
| 8. Steadfastness angle overlapping for packing sheets | One set |
| 9. Spraying hot melt glue system for packing sheets | One set |
| 10. PLC system for alarming, auto stop of break-down | One set |
| 11. PLC controlling system | One set |
){kind=link}