Automatic Craft Paper Slitting Machine Paper Roll Rewinding Slitter, Roll Slitter Cutting Machine

• After-sales Service: on Line
• Warranty: 1 Year
• Application: Machinery&Hardware
• Type: Roll Slitter
• Work Method: Round Knife Cutting
• Packaging: Cartons
• Model NO.: RYFQ-1800
• Suitable Substrates: Paper
• Packaging Material: Paper
• Transport Package: Carton
• Origin: China

Product Description

Specification

1. Material type: white board paper, carbon-free paper, coated paper, two-side offset paper, etc.
2. Material thickness: 30-510gsm (paper)
3. Max. Diameter of raw material:1800mm
4. Raw material paper core: 3#, 6#
5. Max. Width of raw Material :1800mm
6. Min. Width of Raw Material:400mm
7. Roller surface width: 1850mm
8. Width of slitting: 40-1800mm
9. Rewinding paper core: 3#
10. Max diameter of rewinding: 1500mm
11. Error-correction length:150mm
12. Precision: ±0.15mm
13. Max. Speed: 400m/min
14. Slitting speed: 10---400m/min
15. Total power: 52KW
16. Total weight: 18000kg
17. Dimension: length 7500mm, width 4200mm, height 2300mm
18. Slitting tools: 10 sets for standard, also can do according to    customer's requirement.
19. Upper slitter dimension: Φ160*100*50mm

       Brand: shanghai shenlong
Bottom round cutters dimension: Φ150*120*40mm
       Brand: shanghai shenlong

Rewinding shaft with 2pcs of 3# air shaft, recycle using.

This equipment is with 13pcs if Φ120 aluminum roller, 1pcs of rubber roller and 1pcs of steel roller.

With 2pcs of round cutter shaft.

Configuration

Name	Specification	Qty	Brand name
Casting frame	Thickness of wallboard 80mm	1set
3 inch air shaft		2pcs	Qingbang, Shanghai
Main traction roll(mirror steel roller)	Φ250*2350mm Φ300*2350mm Φ150*2350mm	3pcs	Hard chromium plating with glazing. Dynamic balance 500m/min. Precision G1.6
Rubber press roller	Φ200*2350mm	1pcs	Imported silica gel, the hardness reach to 70degree, Dynamic balance 500m/min. Precision G1.6
Hardness aluminum oxide running roller	φ160*2350mm	13pcs	Hardness oxidation treatment, Dynamic balance 500m/min. Precision G1.6
Rewinding servo motor	22KW	2sets	Intell, China
Traction servo motor	18.5KW	1set	Intell, China
Unwinding magnetic powder clutch	20KG	2sets	Wenzhou
Motor for blowing the slitter edge	5.5KW	1set	Wenzhou
Bearing		some	HRB(guider roller) NSK(traction roller)
Pneumatic part		some	SMC
Simulation error-correction		1set	arise
PLC	SMART-S7-200	1pcs	SIEMENS
10" touch screen	TPC1061Ti	1pcs	MCGS
Proximity switch		1pcs	OMRON from Japan
Low-voltage apparatus		some	Schneider
Power supply	S100-24	1pcs	Taiwan meanwell
Linear guideway		1set	Hiwin, Taiwan
Waste discharge motor	5.5KW	1unit	Wenzhou, China

 

Function description
Unwinding part

1. Adopts shaftless hydraulic fixing system, easily for one person   operation. Using special conic node system from 3" to 6" for durable using. The 2 sides clamping arm are controlled by the hydraulic dovetail groove linear guideway. 2pcs of hydraulic clamping oil cylinder moves to each side at the same time, easily operation.
2. 2pcs of hydraulic type loading and unloading material oil cylinder can bear 3T material to save the manpower and time.
3. It does not need to input the material thickness, the proximity switch can inspect the unwinding diameter directly which near the transmission shaft. The machine can slow down according to the rest material, in this way, the worker can prepare for the next roller. The unwinding tension adopts the sensor close-cycle automatic tension, controlled by PLC.
4. With the manual adjustment system, the unloading material tightness can be controlled. The adjustable range: +/-20mm
5. Automatic error-correction for the edge position is controlled by the CCD photographic system. The whole frame adopts guide way type to move left and right which driven by the servo motor. The moving part uses thread screw.
6. Pneumatic material connecting device, with the square steel structure, adopts the way of pneumatic and rubber pressing roll to save the material
7. Bridge type feeding materials
8. The unwinding adopts the Italy pneumatic braking.
9. Precision proportional valve use SMC