Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Width 1000mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
Machine Introduction:
*Swing type.
*Max. paper roll dia.: 1500mm
length: 800-1400mm
*Clamping paper roll, moving right-left, arms up-down and paper roll rotation is hydraulic operated.
*Support two paper rollers in the meantime, one is working, and another is for spare part.
* Adopts "Spring clutch".
* Paper tension controlled by pneumatically operated disc brake, setting the tension easily.
Technological Parameter:
| Working Width |
1200mm |
1400mm |
1600mm |
1800mm |
| Heating method |
Steam heating |
| Design speed |
100m/min |
| Economical speed |
60-80m/min |
| Compress-air pressure |
0.4-0.9MPa |
| Flute type |
Standard flute |
UV Flute |
| Standard spec. |
A,B,C,E,F |
| For other type and model, we can produce as customer's requirement. |
NC Single Face paperboard Cutter & Automatic Stacker
Characteristics
1. Can save more than 200groups order, can change cutting size exactly in short time without stop, can connect to computer system, this makes the production management good.
2. Drive system has high precision.
3. Knife has good and stable quality, usage life is long.
4. Roll for leading paperboard has anti-skid material cover, more wear-resisting, size is correct.
5. Servo control motor drive, 5.7 inch Colorful touch screen, you can check every item clearly.
6. The machine can automatic count, automatic stack, automatic separate the pale without stop the machine.
7. This machine occupied small space, saving labor, it is the best choice for the low speed machine.
Main Technological Parameters
1.Max. cutting width: 1200mm
2.Design Speed: 100m/min
3. Max. Working speed: 60-80m/min.
4. Min. Cutting length: 100mm
5. Max. Cutting length: 9000mm
6. Cutting precision: ±1.5mm (stable speed)
7. Max. Stack length: 1350mm
8. Max. Stack height: 100mm.
Audited Supplier 
Introduction:
){kind=link}
){kind=link}