Paper Width	Gross width 850mm, Net width 840mm
Cutting numbers	2 cutting-A4 210mm (width)
Paper roll's diameter	Max.Ф1450mm. Min.Ф600mm
Paper core's diameter	3"(76.2mm)or 6"(152.4mm) or according to the clients' demand
Packing Paper grade	High-grade copy paper; High-grade office paper; High grade Free Wood paper etc.
Paper weight	60-100g/m2
Sheet length	297mm ( specially design for A4 paper, the cutting length is 297mm)
Ream amount	500 sheets Max. Height: 45-55mm
Production speed	Max 0-300m/min(depends on different paper quality)
Max. Numbers of cutting	Max1010/min
Output of the ream	About 12-16 reams/min
Load of cutting	100g/m2 (2×100g/m2)
Cutting accuracy	±0.2mm
Cutting condition	No variation of the speed, no break, cut all the paper at one time and need the eligible paper.
Main power supply	3*380V /50HZ
Voltage	220V AC /24V DC
Power	23KW
Air consumption	200NL/min
Air pressure	6 bar
Edge cutting	5~15mm×2
Safety standard	Design according the safety standard of China

Paper Width	Gross width:310mm ;net width :297mm
Ream packing high	Max 55mm ; Min 45mm
Packing roll dia	Max.1000 mm ; Min.200mm
Packing roll width	560mm
Packing sheets weight	70-100g/m2
Packing sheets grade	high-grade copy paper, high-grade office paper, high-grade offset paper etc.
Design speed	Max 40 reams/min
Operation Speed	Max 35 reams/min
Packing condition	no speed variations, no breaks, cut all the paper at one time and qualified packing paper.
Driving	AC Servo Precision Control
Main power supply	3*380V /50HZ( or as required)
Voltage	220V AC /24V DC (or as required)
Power	18KW
Compressing air consumption	300NL/min
Air pressure	6bar

1) Machine Type	Each machine table can take 2 sets of shaftless paper rack.
2) Diameter of the paper roll	Max. Ф1450mm
3) Width of the paper roll	Max. Ф850mm
4) Paper rack's material	Steel
5) Clutch device	Pneumatic Braker and control
6) Clip arm's adjustment	Manual adjust by oil pressure
7) Paper core demanding	3"(76.2mm) air expansion shaft chuck

1) Upper and lower knives are rotary make the cutting accuracy is very precision.
2) Anti-curve device Include one set of square bar and steel wheel. When the curve paper through paper edge unit that can adjust the paper square and let it flat.
3) 5 sets slitting knives Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф200mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge.

1) Transporting by level and overlapping device
2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system.
3) Static removal device(Include static removal bar and Negative ion generator)

1) Automatic device for paper stack up and down
2) Jogging device and clap paper tidy. Control by air vat, when design sheet, the cylinder up and down by cut paper bar. After transport paper to belt, transport to the pack table cross.

Upper knife	1 sets	550mm Material: compounding of tungsten steel
Lower knife	1 sets	550mm Material: compounding of tungsten steel
Upper slitting knife	5 sets	Ф180mm Material: SKH
Lower slitting knife	5 sets	Ф200mm Material: SKH

High Speed Automatic A4 Paper Cutting Machine A4 Paper Production Line A4 Paper Cutting Machine and Packaging Machine

Contact Supplier