RYQJ-600B Micro-computer Control High Precision Sheeting Machine
Introduction
1. This paper cutting machines is suitable for cutting big rolling packaging materials such as paper, paper-plastic, multicolor laminated material, etc.
2. It adopts servo motor for controlling constant-length cutting.
3. It adopts pneumatic, photoelectric sensor for controlling transmission system, with photo, electric, gas together,
4. It has the functions of easy operation, high precision, good stability, low noise.
5. This machine has the functions of the frequency converter timing device, auto-matic counting, stop working by alarm and tension adjustment by magnetic powder or manual with friction unit.
Technological Parameters
| Model |
RYQJ-600B |
| Width: |
600mm |
| Thickness of cutting: |
0.01~0.50mm (depending on materials) |
| Max. diameter of material: |
¢1200mm |
| Length of cutting: |
0-1200mm |
| Max. cutting speed: |
20-140times/min. |
| Cutting Precision: |
±0.2mm |
| Voltage: |
50Hz/380V |
| Total Power: |
4.5KW |
| Weight: |
approx. 2000KG |
| Overall dimension(LxWxH): |
2200mm x 1600mm x 1200mm |
Configuration of the machine
1. Unwinding unit
Machine shelf adopts cast quality steel plate
Adopts airpressure automatic lifting function
Lifting adopts 150 model double cylinder start
Magnetic powder tension control system (1set)
Control type :Use potentiometer control
Tension control scope : 3-50kg
Tnesion magnetic powder use 10kg controller (1set)
Material pulling rolls adopts air shaft type (1 unit φ74×1150mm)
Transmission guid roll:aluminum guide roll by active balance treatment(3 unit φ70×1150mm)
Matrial can be adjustable righ and left
Control type:Pneumatic control
Unwinder motor 600w
2. Main machine part
Shaft :Trough steel and high quality steel plate structure in 10mm thickness
Trough beam style stell:40×80×1100mm
3. Traction device:
Strcuture style:active traction and passive press fasten style
Based seat is casting structure ( 1set)
Traction roller is rubber roller(Spec:2unit φ65×1150mm)
Press fasten styple: controlled by pneumatic
Press fasten cylinder:(2unitφ40×20mm )
Transmission guide roller: aluminum guide roller(Spe.:5unitφ74×1150mm)
Traction motor adopts servo motor 3kw,Drive in-phase fix the length
Length can be adjustble by micro-computer
4. Material delivery structure:
Adopt motor and shift gears combination ways
Main motor: speed adjusted by transducer
Transducer: 2.2kw
Drive style: drove by main motor and traction through active roller
Servo motor 2.2kw
Transmission: adopts triangle belt and belt wheel together structure
Material-delivery: adopts floating backrest structure for buffer action to keep material
Floating upper and lower tension adopts pneumatic traction Cylinder specification:(1unit φ50×150mm )
Floating guide roller: adopts aluminum guide roller(spe.:3unitsφ74×1150mm)
Whole material-delivery structure will be controlled by displacement sensor
5. Cutting Unit
Cutting style: fix well the lower cutter and cut actively by upper cutter
Cutter holder: adopts casting heavy style structure
Slip bearing(2unit)
Fount (2 unit)
Lubricating oil can be recycled using
Both upper and lower cutters adopts bar style imported balance silicic steel cutter
Cutter position can be adjutable by hand
Active transmission style: main motor transmission equipped with derailleur enable centrifugal wheel joined with connecting pole to run cutter reciprocating
Main motor: by transducer speed adjusting (1unit)
Transmission: adopts gear wheel and chain wheel together structure
Centrifugal wheel(2unit)
Connecting pole (2unit)
7.Electical control part:(connect with main machine)
Control system: Main machine control,tension control,adjusting control
Main machine control:Main motor control,traction control,material delivery control,cutting contro
Tension control :Unwind tension,the speed of control scope is wide, good performance whatever the speed
Electrical meter counting,alrarm stop,auto length-position functions Above electrical components is Delixi brand in China.
All the switchs are made in "schneider" Germany
8.Other condition:
Power supply :Three phases four lines air siwitch, 380V / 50Hz (can be made according to user
More picture:
Audited Supplier 
){kind=link}