| Customization: | Available |
|---|---|
| After-sales Service: | Have |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Equipments Name |
MJT-60-1600 Economical |
MJT-80-1600 Standard |
MJT-100-1600 High-speed |
| Mechanical Roll Stand (include the paper roll rail.) | 2 | 2 | |
| Hydraulic Roll Stand (include the paper roll rail.) | 3 | ||
| Pre-heater 400mm (Up) | 1 | 2 | |
| Pre-heater 600mm (Ground) | 2 | ||
| Vacuum Single Facer (Roll280), gimbal drive | 1 | 1 | |
| Vacuum Single Facer (Roll320), gimbal drive | 1 | ||
| Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | 1 | |
| Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) | 1 | ||
| Double preheater 400mm | 1 | 1 | |
| Double preheater 600mm | 1 | ||
| Double Gluer - A | 1 | 1 | |
| Double Gluer - B | 1 | ||
| Double baker (600mm X9heat plates, 4.5meter cooling part.) | 1 | ||
| Double baker (600mm X11heat plates, 5meter cooling part.) | 1 | ||
| Double baker (600mm X14heat plates, 6meter cooling part.) | 1 | ||
| Thin Blade (Simple electrical adjust.) | 1 | ||
| High-Speed Thin Blade(Electrical up and down, electrical adjust the precision.) | 1 | 1 | |
| Mechanical Cutter | 1 | ||
| NC Cutter (Servo, straight knife.) | 1 | 1 | |
| Conveyor and Stacker | 1 | ||
| Paperboard booking machine | 1 | ||
| Glue system | 1 | 1 | 1 |
| Steam system (not include the boiler and pipes.) | 1 | 1 | 1 |
| Technological Parameters | MJT-60-1800 Economical model |
MJT-80-1800 Standard model |
MJT-100-1800 High-Speed |
| Line size L*W*H(m) |
32×3.6×4.5 |
36×3.6×4.5 |
48×4×4.5 |
| Factory size L*W*H(m) |
35×11×4.5 |
40×11×4.5 |
55×11×4.5 |
| Steam cost | 0.8~1.2Mpa About 2T/h |
0.8~1.2Mpa About 2T/h |
0.8~1.2Mpa About 2T/h |
| Starch Cost (g/m2) | 11-13 |
11-13 |
11-13 |
| Raw paper width (mm) | 1600 |
1600 |
1600 |
| Mechanical Speed | 60m/min |
80m/min |
100m/min |
| Economical speed | 45m/min |
50m/min |
80m/min |
| Shift capacity (*104m/8h) | 2.5 |
3 |
5 |
| Transversely cutting precision | ±2.5 |
±1 |
±1 |
| Transversely cutting scope (mm) | 600-2600 |
500-9999 |
500-9999 |
| Slitting scope (mm) | 145-1600 |
145-1600 |
160-1600 |
| Slitting precision (mm) | ±1 |
±1 |
±1 |
| Workers | 6-9 |
6-9 |
6-9 |
){kind=link}