Keywords: Mixing tank, Concentrated and diluted formulation tank, Concentrate tank, Reaction tank, Concentrated and Diluted Formulating Tank
PLG Mixing Tank
(Magnetic Mixing Tank)
With the structure of combining upward and downward oval sealing heads and standard layer jacket and equipped with the lower magnetic power mixer, it is a product researched and developed by our company through many years. It has special mixing vane structure to meet the need of mixing various media. The mixer will not produce sediments as the distance between the bottom and it is small. It has solved the problem of being unable to mix few liquid materials. The supporting sliding bearing of the mixer is made of hard alloy. It has such advantages as simple structure, anti-corrosion, no abrasion, few dead corners,etc.
Technology Introduction Royalpharm
PLG mixing tank use upright single-layer structure, inside dealing with polishing, outside use grinded board for keeping temperature, welding part dealing with polishing. Materials touched liquid all use 316L stainless steel, others use 304 stainless steel. Upside has water entrance, material feeding hole, circumfluence hole, disinfection hole, 360°rotation cleaning ball, manhole, 0.22µm air breathing machine and churn system. Downside has water exit, pollution exit, sampling hole, Temperature probe, Liquid level transducer. In sidepiece of the tank, there are Steam entrance and cooling water entrance.
Technological Parameters Royalpharm
|Nominal Diameter (mm)||500||600||800||1000||1200||1200||1400||1400||1500||1600|
|Nominal Pressure in tank||0.5 MPa|
|Jacket nominal pressure||0.25 ~ 0.6 MPa|
|Motor Power (kw)||1.1||1.5||2.2||4.0||4.0||4.0||5.5||5.5||5.5||7.5|
|Stirring speed (rpm)||36||63||85||130||180|
Main Structure Royalpharm
|1||Body and Cover||Material 316L stainless steel, inside dealing with polishing, Roughness degree: Ra0.28.|
|2||Holes on body||Liquid exit, pollution exit, temperature test hole, condensation water exit, distilled water entrance, material feed hole, disinfection hole, cleaning hole, live steam entrance, circumfluence hole, air breathing hole, cooling water hole, sampling hole.|
Main configuration Royalpharm
|No.||Name||Origin||Quantity||Technology and Capacity|
|1||Liquid level pipe||Own company||1||1. Test the liquid level and display.|
2. Test the liquid temperature and display.
|3||Breathing machine||Shanghai||1||Hydrophobic Polytetrafluoro 0.2µm filter element|
|4||Cleaning ball||Shanghai||1||360° rotation cleaning, no dead conner.|
|5||Fixed Mothball||Shanghai||1||Material 316L stainless steel, sanitary type.|
|6||Speed control electric machine||Wuma||1||Running smoothly, airproofed and oil leaking prevented design.|
|7||Machine stand||Own company||1||Stainless material with polishing dealt on surface.|
|8||Blender||Own company||1||Material: 316L stainless steel, paddle type, longitudinal churn.|
(1) The bottom of the tank use concavo-convex plate cover and longitudinal churn type. This design prevents the liquid whirlpool during rotation, make the moving track of the liquid not regular when churned, then make the liquid mix very uniformity, and improve the mixing speed.
(2) The tank use high-grade fittings, this make sure the equipments can safely running for a long time.
Speed controlling machine from Wuma, with low noisy, runs smoothly, mechanical seal, oil leaking prevent design. It is very suitable for pros and cons running frequently.
The Liquid level test machine use our own product.