Semi-Automatic Printing & Slotting & Die-Cutting Machine Tool Packing Printing Machinery

• Customization: Available
• After-sales Service: Support
• Warranty: 1 Year
• Model NO.: MJBL-4
• Max Feeding Size: 1400X2600mm
• 1400X2600mm: 1400X2400mm
• Min Feeding Size: 380X750mm
• Main Power: 7.5kw
• Transport Package: Iron Tray
• Trademark: Royal
• Origin: China
• Production Capacity: 30

Product Description

MJBL-4 Semi-automatic Printing & Slotting & Die-cutting Machine (2500*1400mm)

 

Product Parameters

Technology Parameter:

Model	MJBL-4
Economic speed	60-80pcs/min
Max feeding size	1400X2600mm
Max printing size	1400X2400mm
Min feeding size	380x750mm
Wallboard thickness	40 mm
Main power	7.5kw
Thickness	2-11mm
Plate roller axial adjustment	±5mm
Plate roller radial adjustment	360°

 

Product Description

Introduction:

1. The wall panel is made of 40mm thick high-quality cast iron with good shock absorption performance and large-scale machine tool processing.
2. All drive rollers are made of high-quality steel, finishing, balance correction and hard chrome plating.
3. The printing slotting phase adopts the planetary gear structure electric digital phase controller 360 degree adjustment (can be adjusted both in operation and stop).
4. The transmission gear adopts 45# high-quality steel, which is made of many processes such as quenching and tempering, picking teeth and desalination processing.
5. Automatic circulation ink system, pneumatic diaphragm pump for stable ink supply, easy operation and maintenance. Ink filter, filter impurities, extend the life of the web roller to ensure the printing effect. The ink roller can be pneumatically raised and operated independently to prevent the ink from drying out during shutdown and to facilitate cleaning of the ink roller.
6. Each unit electric split body (drive shaft with friction clutch, to avoid burning motor when overload), pneumatic lock, relax. The warning light is displayed when walking to improve the safety of the operator.
7. CAD module design can be combined with multi-color printing units.
8. Paper guide roller, embossing roller, paper take-up shaft, cross-slider drive, gears without backlash transmission to ensure the precision of paper guide.
9. The anilox roller is used (Dalian); the rubber roller is 60°±2° Shore hardness
10. The electrical appliance adopts the domestic famous brand (Zhengtai) to work reliably and has a long service life.
11. The main motor adopts frequency conversion speed regulation, which runs smoothly and saves electricity.

The bearing is reinforced.

Chain feeder:

1. Semi-automatic chain feeding system , side baffle is adjustable to adapt to the different sizes of cardboard .
2. The workbench is distributed with multiple chains, each with three spans of cardboard.
3. Electrically controlled the connecting and separated for the every unit with alarm to ensure the operator's safety during its proceeding .
4. Auto counting device ensure correct production quantity.

Printer part:
1.Printing roller:

1. Out-diameter:480mm (include plate 4mm)
2. Made by good quality steel plate with surface grinding and hard chromium plating.
3. Treated with balance correction, runs steady and smoothly.

2.Pressing printing roller:

1. Out-diameter 155mm
2. Thick wall seamless steel pipe with surface grinding and hard chromium plating.
3. Treated with balance correction, runs steady and smoothly.
4. The gap of the embossing roller is adjusted by the self-locking worm gear box, and the scale is displayed, which is convenient and quick, and the adjustment range is 0-11mm. (The internal setting of the fine adjustment dial makes it easy to adjust the parallel of the two rollers)
5. The printing phase adjustment adopts a precision planetary device, which can be adjusted at any time. The electric digital display can also be input automatically by adjusting the digital control of the adjusted size.

3.Ink anilox roller:

1. The outer diameter of the high-quality steel is ¢190mm, the surface of the steel pipe is ground, the wire mesh is rolled, the hard chrome is plated, and the balance correction eliminates the centrifugal force. (The number of lines per group can be selected according to user requirements 200-220-250 lines)
2. The gap between the anilox roller and the printing plate is adjusted by the self-locking worm gear box, and the scale is displayed, which is convenient and quick.
3. The anilox roller automatically idling cycle so that the ink does not dry out and is automatically cleaned.

4.Rubber roller:

1. Diameter 185mm.
2. The surface of the steel tube is wrapped with wear-resistant rubber and has a Shore hardness of 60° ±2°
3. Highly special grinding in the rubber roller, the ink transfer effect is good.
4. The gap between the roller and the mesh roller is adjusted by the self-locking worm gear box, and the scale is displayed, which is convenient and quick. (The internal setting of the fine adjustment dial makes it easy to adjust the parallel of the two rollers).

5.Up and down paper receiver roller:

1. Upper roll: 86mm seamless steel pipe with outer diameter, surface grinding and hard chrome plating.
2. Equipped with four moving paper feed rings, it avoids the great inconvenience of the traditional top-pressing device to damage the roller shaft and operation.
3. Lower roll: out-diameter 155mm seamless steel pipe with outer diameter, surface grinding and hard chrome plating.
4. The gap of the paper feed roller is adjusted by the self-locking worm gear box, and the scale is displayed, which is convenient and quick, and the adjustment range is 0---11mm. (The internal setting of the fine adjustment dial makes it easy to adjust the parallel of the two rollers)

6.Ink circulating:

1. Pneumatic surge pump. It is steady to supply ink and easy to operate.
2. Printing ink filter screen to filter out impurities.

7.Up and down feeding roller:

1. Upper roll: 86mm seamless steel pipe with outer diameter, surface grinding and hard chrome plating. It is equipped with 4 knurled paper feed rollers.
2. Lower roll: out-diameter 155mm seamless steel pipe with outer diameter, surface grinding and hard chrome plating.
3. The gap of the paper feed roller is adjusted by the self-locking worm gear box, and the scale is displayed, which is convenient and quick, and the adjustment range is 0---11mm. (The internal setting of the fine adjustment dial makes it easy to adjust the parallel of the two rollers)

Slotting Part

1. Cutting and slotting base can be 360°positive and negative electrical adjusted. Use digital display tiny-adjust equipment.
2. The knives can be synchronized adjusted. The adjust is very easy, and the lock is reliable, slotting precision is good. The adjust function use inner-gear drive design and wear well.

The back electrical control switch can control front operation. During the work, if there is urgent situation, the worker in the back can control the equipment running.

Die-cutter part:

1.Rubber pad roller:

1. The lower die-cutting roller has a diameter of 360 standard die-cutting rolls, and the alloy steel is centrifugally cast and sintered with high precision.
2. Pad roller diameter 388.9mm, high quality 45# steel finishing, balance correction, hard chrome plating. The rubber pad is made of German Dipai polyurethane rubber sleeve with smooth incision, easy to install, and the die cutting is more than 8 million times. The rubber pad roller adopts mechanical left and right moving device, each knife is in different positions, effectively extending the service life of the rubber pad, the moving distance is 30mm, and the linear velocity automatic compensating device makes the die cutting work infinitely without circulating in the circumferential direction. The wear of the rubber sleeve is more uniform, and the tracking compensation is automatically performed when the diameter of the soft roller is changed, no manual adjustment is required, and the die-cutting size of each batch of the carton is ensured to be completely uniform, and the die-cutting roller is also equipped with a cylinder separating device, but only the cardboard When the air is idling, the upper and lower rollers can be separated to reduce the wear of the rubber sleeve and the cutter. At the same time, the service life of the rubber sleeve and the die is greatly extended.
3. The soft roller automatic grinding mechanism performs multiple grinding on the worn rubber pad. The rubber sleeve re-use rate is greatly improved, the warning light is always flashing when the soft roller is repaired, and the limit device is also installed at both ends.
4. Cleaning system: the front and rear embossed optical axis is transmitted to the belt through the deceleration motor, and all the paper edges are cleared out, so that the machine will not work normally due to the accumulation of paper. Greatly improved work efficiency.
5. Die cutting roller phase adjustment mechanism

         1)Planetary gear construction.
         2)The die-cut phase adopts microcomputer control and electric digital 360° adjustment (can be adjusted by running and stopping)

Gears and bearings:

1. The wallboard is made of high-quality cast iron HT250 with a wall thickness of 40mm. It is made of large-scale machine tools with high precision.
2. The main drive gear adopts 45# high-quality steel, (thickness 40mm), which is made of multi-step process of quenching and tempering, fine car, picking, desalination, etc., high precision, smooth running, low noise and long service life.
3. Lubrication adopts the gear pump spray circulation method to make the gear lubrication more fully. Effectively extend the life of the gear.

expansion joints: The main drive shaft adopts keyless connection to reduce the connection gap and ensure the connection accuracy and reliability to ensure the printing overprint precision.
 

Company Profile