| Customization: | Available |
|---|---|
| Printing Page: | Single Faced |
| Printing Color: | as You Want |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Parameter | Unit | Model |
| RYKM-200B | ||
| Max. Feeding Size (W×L) | mm | 820×2000 |
| Max. Printing Size (W×L) | mm | 800×1800 |
| Min. Feeding Size (W×L) | mm | 220×500 |
| Board Thickness | mm | 2-9 |
| Rubber Plate Thickness | mm | 7.2 |
| Printing Roll Axial Displacement | mm | 10 |
| Overprinting Precision | mm | ±0.5 |
| Slotting precision | mm | ±1 |
| Die-cutter Precision | mm | ±1 |
| Machine Speed | pcs/min | 200 |
| Working power | kw | 20 |
| Machine power | kw | 25 |
|
|
|
Feeding Unit Germany Servo Control (BOSCH REXROTH)
1Electric controlling the movement of the machine and installed alarms in order to assure the safety of the operating personnel while the bell rings constantly during marching.
Moving shaft installs friction clutch to avoid of damaging the machine by error action.
Pneumatic interlocking mechanism.
It has protective device when main motor starts. If the machine has not been locked, the main motor can not start. The main motor uses frequency motor to save energy.
It is the lead-edge feeding adopting wind-absorbing auxiliary. According to the bending of the board or the thickness of the board, it can adjust the capacity of winding in order to insure the smooth board supplying.
Installed dusting negative pressure device, good-quality import brushes, can clean the matter on the paper surface and increase the printing quality.
The upper paper-feeding roller is wrapped with antifriction rubber and the lower paper-feeding roller is empaistic and chromeplated, all of rollers do balance alignment.
The space of the paper-sending roller is adjusted by hand. The scale panel shows the adjusted data.
Electrical automatic to zero in feeding.
It has skip feeding device, the counter can accurately record the quantity of production.
Installed automatic to zero position device, the position can be correctly adjusted by means of trial printing two pieces of cartons, thus reduces the waste of cartons.
Automatic to adjust the side-board and back-board, it has data display.
It has flap device to make paper board trimness.
Servo-controller feeding system made in Germany. It can increase the precision of feeding with feeding-wheel and absorbing fan.
|
|
|
|
| Printing Unit:
Printing rollers use good-quality heavy-walled seamless steel pipe, grind the surface and do the hard chrome plating.
All of the rollers are corrected by dynamic balance, so the revolving is steady.
Applies hanging plate printing system, easily for plate changing; and has pedal switch, easily for plate hanging.
The surface of printing roller is to grind and do the hard chrome. The space of printing roller is adjusted by hand; the scale panel shows the data.
It has anilox roller plus paper feeding system auto lifting device (In feeding anilox roller drops and contacts printing plate; it rises to separate from the printing plate when stop feeding).
Phase-adjusting mechanism, planet-gear structure.
Adopting PLC to control the printing phase by the way of electric display adjusting at will. (Adjustment when running and stopping is OK)
Adopting electromagnetic clutch braking mechanism, while the machine separates or the phase is adjusting; the brakes can restrict the revolving of the machine and keep the point of original gears' position.
Quickly cleaning the ink device, it memory the reset position after cleaning plate.
The rubber roller is formed by means of wrapping a steel pipe with wearable rubber, and has good ink transfer effect.
The transverse position of printing roller can be adjusted by hand, with total distance adjustable from right to left being 10 mm.
The surface of steel anilox roller is to grind, make the reticulate pattern, then do the hard chrome. The reticle is 200-280 LPI.
Adopting rubber roller inking system, soaking-ink mouth has strainer, also has stainless steel ink-chamfer.
|
|
|
|
|
|
|
|
The Slotting Unit
Creasing-wheels cover nice glue, can not damage paper.
The space of the creasing-wheel can be adjusted by hand. The scale panel shows the adjusted data.
Slotting, creasing-wheel, paper-feeding wheel are adjusted together in transverse.
Adopting planet-gear structure phase adjustment.
Adopting encoder and figure display to control the slotter phase, converter adjustment.
Four knives which adjusting the height of the carton are adjusted synchronously.
Electric to adjust the moving of slotter boss by button.
|
|
|
|
|
The Die-Cutting Unit
Cushion roll movement from left to right is 40 mm with mechanism.
Electric phase-adjusting mechanism, planet-gear structure.
The cushion roll will rise to avoid damage when stop feeding, so it can increase the lifetime.
Speed-different compensate device can control the surface speed of the cushion roll.
Adopting PLC to control the die-cutting phase by the way of touch screen adjusting at will.
Automatic lathe the cushion to reduce the pressure of die-cutter. |
){kind=link}