RYTM High speed Automatic Flute Laminator
I. Specifications:
| Model |
1300 |
1450 |
1650 |
| Max. Sheet Size |
1270mmx1000mm |
1420mmx1450mm |
1620mmx1600mm |
| Min. Sheet Size |
500mmx440mm |
500mmx440mm |
500mmx440mm |
| Thickness of face Paper |
200~800g/ |
200~800g/ |
200~800g/ |
| Thickness of Bottom Paper |
0-9mm |
0-9mm |
0-9mm |
| Max. Speed |
11000pcs/hr |
11000pcs/ hr |
11000pcs/ hr |
| Laminating Precision |
±1.5m/m |
±1.5m/m |
±1.5m/m |
| Total Weight |
6000kg |
6250kg |
6500kg |
| Total Length |
10700 mm |
10800 mm |
10900 mm |
| Operation Space (mm) |
3000x13500 |
3100x13500 |
3200x13500 |
| Power |
380V 3~(15hp) |
380V 3~(15hp) |
380V 3~(15hp) |
II. Features of the machine:
a) Key Points
i. High Speed: It can run 11000 sheets per hours for sheet length 450mm.
ii. High Precision: At normal speed the precision can be controlled at ±1 mm with the yield 98%.
iii. Glue saving: It can be 30 grams of glue per square meter.
b) General Introduction:
The RYTM series High Speed Automatic Flute Laminator is suitable for the lamination of printed cardboard paper with 2 ply or 4 ply corrugated sheet which is mainly used in food, beverage boxes etc.
The machine adopts chasing registration method with the help of imported low-voltage parts, liquid sensor and motion control system.
c) Machine Structure:
Upper Feeding Part:Feed the paper of 200-800gsm. It can be thinner according to the size and quality of the paper
Bottom Feeding Part:Feed different kinds of corrugated sheet between 2-9mm.
Conveyor:Press the laminated paper and convey to the paper delivery unit.
Gluing Part:Coating glue on the bottom paper.
d) Features by Parts:
i. Upper Feeding Part:
1. High speed feeder with 3 sucking suckers and 4 delivery suckers with the highest speed 16000 sheets per hour.
2. Double sucking rubber and single rubber forwarding which can avoid effectively double paper.
3. There are two side blowers as well. The position of the side blower can be adjusted to ensure the smooth feeding of paper.
ii. Top Paper Conveying Part:
The conveying of the face paper unit adopts scale feeding method,Compared with paper to paper conveying,the advantage is that the conveying speed of face paper can be reduced,ensuring the smooth feeding of the paper when running in high speed, without worrying of the scraping of the paper by side lays and when the paper is uneven, the paper front will press the paper back to make the ahead paper even.
iii. Paper Pile Part:
There is sub-paper feeding device there which can hold the paper pile when it is to be finished, so that the paper can be replied without stopping the machine
iv. Lay for the Pre-loading Paper Pile Part
There also has paper pile lay at paper piling part which makes the paper piling easily. It is equipped with rough adjusting wheel and fine adjustment bar.
e) Side Lays of top paper to ensure the precision at side-way
There is a side lay device-puller on machine operation side for better guarantee the face paper side-way precision.
f) After starting the lamination, if fine adjustment at sides part needs to be adjusted, you can turn this wheel. Each circle can move the top paper 1.75 mm either at left or right direction.
Lays For bottom sheet
The adjustment of corrugated board includes side board adjustment front lay adjustment and paper frame adjustment.Side board and front lay can be adjust by manual and lock button based on paper size.
g) When order is changed, the operator can do the order change easily by turning these wheels which makes the operation easy and fast. It also can control with hand wheel or the model of corrugated board.
h) Automatic Glue Supply System: The machine adopts imported liquid level controller for glue supply. When detecting no glue in the glue barrel, it can stop the feeder automatically to avoid waste of paper.
i) Motion Control System: This machine adopts perfect combination of motion control system and servo system for better lamination precision. It only needs data input.
j) The advantage of adopting motion control system is to keep face paper and bottom paper with good lamination precision.
k) Watering Roller: It can not only wash the dirt out of the bottom paper back, but also can pasting water on the bottom paper to make it soft and even to facilitate the lamination.
l) Timing belt Transmission: Machine adopts timing belt transmission with stable running high precision and low noise.
m) Front Lead Feeding Device: The bottom paper section adopts accurate vacuum feeding with big volume fan for better conveyor of curve paper. It is much better and convenient for five layer board stick.
n) The special parameters on the touch screen can be adjusted according to the paper type, for example, the distance of feeder lifting
o) It is convenient when adjust the position of face paper and bottom paper. If you want to the face paper exceed the bottom paper 3mm, enter 3 on the screen. The data can not be changed when the machine speed is changing, the max data can be 30-40.,it can satisfy the demand of some special user.
III. Machine Installation
In order to convenient operate and easy fix, warehouse should be big enough to put machine(picture A G I). Next picture is plan and appearance of stereogram.It is different between different model of laminator machine.A mong them, the height of machine is 2400mm.Check below machine size:
Main data
1.Main machine packing:two box
2.Packing volume:The first box:5600x2450X2400mm
The second box:6100×2000×1100mm
3,Main machine gross weight: The first box:4.5/4.625/4.75T
The second box:1.5/1.625/1.75T
IV. Configurations:
| Name |
Brand |
| PLC |
SIMENS S7-200 |
| Servo motor and controller |
JAPAN YASKAWA |
| Touch screen |
TAIWAN WEINVEW |
| Frequency transformer |
JAPAN MITSUBISHI E740 |
| Photoelectric switch |
SWITZERLAND BANMER |
| Contactor |
FRENCH SCHNEIDER |
| Relays |
JANPAN OMRON |
| Button |
SHANHAI TIANYI |
| Glue liquid control |
JAPAN OMRAN |
| Cog belt |
TAIWAN SANWU |
| The key bearing |
JAPAN NSK |
| Other Bearings |
RENBEN BEARING |
| Main Power Motor |
GERMANY SIMENS |
| Air Pump |
Tai Wan Brand EUROVAC Rotary Vane Pump |
V. Attached Tools
| L type hexagonal Spammer |
One set |
| T type hexagonal Spammer 5,6mm |
Each of 1 branch |
| Monkey Wrench 2″ |
1PC |
Plus Screwdriver |
1PC |
| Minus Screwdriver |
1PC |
| Plum wrench openings |
10,12,13,14,17,19 (each1 PC) |
| Sharp-nose pliers 6″ |
1PC |
| Slip joint pliers 8″ |
1PC |
| Shaft retaining ring clip S |
1PC |
| Hole clasp clip R |
1PC |
| TOP Tape measure 3.6M |
1PC |
| Aluminum Ladder |
1PC |
| Tools Box |
1PC |
| Operation Manual |
1PC |
| Glue Barrel |
1PC |
VI. Attached Spare Parts:
| Sucker Rubber Ring |
30PC |
| Paper Delivery plate |
1PC |
| Pre-piling paper trolley |
1PC |
| Pallet (Wide) |
4PC |
| Pallet( narrow) |
4PC |
| Switzerland BANMER photoelectric switch |
1 PC |
| Tai Wan Yangming proximity switch |
1PC |
| 08B Chain Clip |
3PC |
| 12A Chain Clip |
3PC |
| 08B chain transition section |
3PC |
| 12A chain transition section |
3PC |
VII. Consumable Parts List
| Tooth Belts |
The whole machine |
| Face paper conveying belt 2mm Nylon |
The whole machine |
| Copper block sheet |
The whole machine |
| Feeder sucker |
The whole machine |
| Feeder brush |
The whole machine |
VIII. Other information:
1. The above price is based on FOB Tianjin, China.
2. The enclosed pictures are just for reference, kindly please make the specification and object as the standard.
3. As for the overseas installation, the customer shall pay each installation person 50.00USD per day and bear the costs of air trip tickets, food and accommodation.
4. The fabrication period is within 120 days and the installation period within around 15 days after the advance payment received.
5. 30% advance payment paid by T/T before fabrication and 70% balance payment paid by LC or TT before delivery.
Audited Supplier 
){kind=link}
){kind=link}