MJSGL-2-1200 2PLY Single Face Line
( S Flute, Design 50m/min, work speed: 30-40m/min)
Electric Mill Roll Stand
1.Machine Description:
*This machine is used for supporting the paper roll, supply the paper to the production line
2.Machine Function:
*It can be loading two paper rolls at the same time, without stopping the machine for changing paper roll
*The whole machine moving use motor fully electric controlled, electric control arm lift and down, clamping and open, left and right moving
*Tension control: manual or pneumatic disc brakes
*The chuck adopt inner expansion type or teeth type, reduce the destruction of the paper core. saving paper
3.Machine Technical Parameter:
| Max. Working Width |
1200mm |
| Max. Paper Mill Dia |
1400mm |
| Max. Working Pneumatic Pressure |
0.6-0.9Mpa |
| Max. Supporting Weight (One side) |
2T |
| Clamping Motor Power |
550W*4pcs |
| Lifting Motor Power |
1.5KW |
S flute Single Facer
Parameters of Main Parts:
| Working Width: |
1200mm |
| Design Speed |
50M/Min |
| Flute Profile: |
S / height 1.1mm |
| Main corrugated roller |
Ø215mm |
| Pressure roller |
Φ215mm |
| Glue Roller |
φ215mm
( 45# seamless steel pipe, surface treated with special mesh nicking and chrome-plating) |
| Glue Scraping Roller |
φ124mm
(20# seamless steel pipe) |
| Pre-heating Roller |
φ270mm
(20# seamless steel pipe) |
Machine Features:
* content control.
* This machine adopts independent motor transmission and variable-frequency control.
* Synchronous belt drive, more smoothly, without noise.
* It adopts wind adsorption for paper guiding to keep flute stability at high speed
* The corrugated paper is adsorbed to the middle corrugated roller to form a negative pressure zone of 180°and then to finish the rolling of corrugation through the vacuum box by fan.
* The width of suction slot of lower corrugated roller is not more than 2.3-2.7mm, able to reduce the stripe mark on single side corrugated cardboard.
* This machine adopts auto-cycle glue supply and pneumatic control glue supply and return, making it be characterized by buffering effect.
* The glue roller surface is treated with special mesh nicking and chrome-plating
Rewinder Machine
Machine Description:
*Rewinder Machine is designed for Corrugated Single face Reels
Technical Parameter:
| Working Width |
1200mm |
| Layers of rewinding |
2 |
| Max. Dia of rewinding |
800mm |
| Motor Power of rewinding roll |
40N |
| Power |
380V/50HZ |
| Low-voltage Brand |
CHINT |
Machine Description:
* After connectting the main power supply,turn on the power switch, then you can operate easily.
* The control mode is achieved by adjusting the torque.
* Unwinding and rewinding process all adopt air-expansion shaf to bear.
* * Air-expansion shaf can also used with paper tubes.
* Adjust the torque to keep the retractor in synchronization with the single facer machine.
Applicable:
Company:
Audited Supplier 
){kind=link}
){kind=link}