• 2 Ply Paperboard Production Line for Small Factory (MJSGL-3)
  • 2 Ply Paperboard Production Line for Small Factory (MJSGL-3)
  • 2 Ply Paperboard Production Line for Small Factory (MJSGL-3)
  • 2 Ply Paperboard Production Line for Small Factory (MJSGL-3)

2 Ply Paperboard Production Line for Small Factory (MJSGL-3)

Type: Carton Production Line
Automatic Grade: Automatic
Main Machines of Line: Single Facer, Roll Stand, Cutter
Paperboard Type: 2-Layer
Working Width: 1400mm 1600mm 1800mm 2000mm
Heating Method: Electrical Heating/Oil Heating / Steam Heating
Customization:

Contact Supplier

Gold Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
MJSGL-3
Economical Speed
40-60m/Min
Compress-Air Pressure
0.4-0.9MPa
Standard Flute
UV Flute
Standard Spec.
a,B,C,E,F
Transport Package
Wooden Pallet, or Steel Pallet
Specification
CE
Trademark
ROYAL
Origin
China
HS Code
844180900
Production Capacity
15-20 Set/Month

Product Description

 
MJSGL-2  Single Facer Line
(2-layer corrugated paperboard production line)

2 Ply Paperboard Production Line for Small Factory (MJSGL-3)
Note: For the Single Facer line, we can produce different model roll stand, single facer, and paper cutter as customer's requirements.
 
 
Introduction:
Single facer line is also called 2-layer corrugated paperboard production line. The Single facer Line is composed of Paper Roll stand, Single facer machine, circumvolve paper cutting machine. To use the web paper material single face machine production line, producing and cutting single face corrugated paper as required sizes, it forms the corrugated board with no need drying. This unit has the advantages of reasonable fabric, advanced technology, high quality of production, high efficiency, low workmanship, operation and maintenance easy. This is the preferred equipment for the production of corrugated cardboard of the cardboard factories.

Technological Parameter:
Working Width 1400mm 1600mm 1800mm 2000mm
Heating method Electrical heating/Oil heating / Steam heating
Design speed 60m/min
Economical speed 40-50 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customer's requirement.
 
 
  Detail introduction:
 
Electrical heating/Oil heating / Steam heating
Design speed 60m/min
Economical speed 40-50 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customer's requirement.
 
 
  Detail introduction:
MJSF-270V Single Facer 

Characteristics
1) The structure is symmetrical, can load two rolls raw paper at the same time, can change the paper roll without stop the machine. The tighten, loosen, up and down, move for center, left and right moving all use electrical control.
2) Effective working width: 1600mm, 1800mm,2000mm, 2200.
3) Max. raw paper diameter: Ø1400mm
4) Min. raw paper size: Ø400mm×900mm
5) Max. load of single arm: 1500kg.
6) Each roll sand has two paper roll sending rails, two paper roll up dolly. Rail is made from the welding of the 12# channel steel and direction-leading pole. The dolly is made from 12# channel steel, the length of the rail is 4500mm.
7) Use disk model brake, have handle and electrical models. (can choose.)
8) The clip head is cast-iron finial model or automatic double expanded model. (can choose.)
9) Electrical elements are centralized controlled, this highly improves the production efficiency.
 
Technological parameters:

1. Paper roll frame working model: Mechanical electrical operation.
2. Paper roll length scope: Max.: 1600mm   Min.:900mm
3. Paper roll diameter scope: Max.: 1400mm   Min.:400mm
4. Single side max. load: 1500kg.
5. Motor power: (all are planet cycloid motor)
Clip motor: 0.75KW   4units   380V    50HZ
Up and down motor: 2.2KW   1unit  380V  50HZ
 
Paper roll up-dolly and rail
1) On the dolly have direction-leading wheel, can send the paper roll stably.
2) Rails are installed inside of the floor, main body is made from 12# channel board and Ø12 cold drawl steel, the length of the rail is 4500mm.
3) Each roll stand has two paper roll sending rails, two paper roll up dolly, it can load the paper roll in two sides at the same time.

 
 
2. MJSF-270V Single Facer 1600mm  
 
Introduction:
Single Facer is the main machine for producing the corrugated paperboard. Vacuum suction model single facer has very good production precision. The choose of the machine is directly effecting the quality of the corrugated paperboard.
 
Characteristics:
1. Cover vacuum suction.
2. Corrugating roll is made of high quality alloy steel 48CrMo, the surface is medium-frequency quenched and chrome-plated. Hardness can reach HRC55~60, which ensures good wear-resistance and long life service.
3. Independent transmission box, transmit by shaft coupling.
4. Glue roll is lifted and lowered pneumatically.
5. Independent glue clean device and electric glue-separate board to control the width of glue.
6. Manually regulate or electrically regulate the display device.
7. Lubricated by high temperature lubricate grease.
8. Surface of all dancing rolls and preheating rolls is grinded and chrome-plated.
9. Pressure roll is medium- frequency quenched and chrome-plated.
10. Maximum speed 100-120m/min, width 1400mm~2000mm.
11. Preheating rolls, pressure rolls and corrugating rolls all meet the National Standard of Pressure Vessel. Working pressure is 1.1MPa.
 
Technological Parameters:
Working Width 1400mm 1600mm 1800mm 2000mm
Heating method Steam heating
Design speed 100m/min
Economical speed 80 m/min
Compress-air pressure 0.4-0.9MPa
Flute type Standard flute UV Flute
Standard spec. A,B,C,E,F
For other type and model, we can produce as customer's requirement.
Corrugated roll diameter (mm) 268
Type Vacuum Absorb, gimbal drive.
Roller material 48CrMo alloy, Heat treated, chrome coated
Machine Size packing (mm) 3000*1300*1700 3300*1300*1700 3550*1300*1700 3800*1300*1700
Machine Weight 4000kg 5000kg 6000kg 7000kg
               
 
 

MJSD-1 Paperboard Cutter Machine (Heavy model)

Introduction
MJSD-1 Series Rotary Die-Cutting Machine (Heavy model) is used for the transverse and vertical cutting of the paperboard as customer's requirement. The machine use chain model drive, have big turning moment. The machine has reasonable structure, the cutting precision is high and adjust is fast.
1.    The machine is electromagnetism speed adjust, continuous feeding, mechanical control, it can work together with the single facer machine as single facer line for producing the 2-layer corrugated paperboard.
2.    The knives quantity can be required by the customer.
3.    Transversely cut 400-2400mm.
`
Technological Parameters
Model MJSD-1-1700 MJSD-1-2000
Max. Cutting width. 1700mm 2000mm
Cutting length 200-2000mm 200-2000mm
Cutting times 20-120times/min 20-120times/min
Power 4kw 4kw
Working Speed 0-70m/min 0-70m/min
Machine Size 2850*1450*1500mm 3350*1450*1500mm
Weight About 1500kg About 1700kg
 
2 Ply Paperboard Production Line for Small Factory (MJSGL-3)
2 Ply Paperboard Production Line for Small Factory (MJSGL-3)

Send your message to this supplier

*From:
*To:
avatar Miss Shelly Cao
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Contact Supplier

Gold Member Since 2015

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company
Management System Certification
ISO 9001, HSE, GMP, ANSI/ESD, QSR
Import & Export Mode
Have Own Export License